|
|
 |
|
|
Call for taper metric gauges or gap gages and weld inspection chisels
|
|
|
|
METRIC TAPER GAGE 700
1 to 15 mm Metric Taper Gauge for measuring ID of tubing,slot widths, hole sizes, bore and flange face to face dimensions. Stainless steel 0.1 graduations are accurate within 0.05mm
|
|
|
|
|
1TG7001-15
|
METRIC TAPER GAGE 1-15mm
|
$13.50
|
|
1TG70015-30
|
METRIC TAPER GAGE 15-30mm
|
$24.95
|
|
1TG70030-45
|
METRIC TAPER GAGE 30-48mm
|
$24.95
|
|
1TG70045-60
|
METRIC TAPER GAGE 45-60mm
|
$26.75
|
|
|
|
|
|
|
NIST traceable long form certification & calibration service available on request |
|
|
|
|
METRIC TAPER GAGE COMBO SET
1 to 15 mm Metric Taper Gauge with attached scale for measuring ID of tubing,slot widths, hole sizes and flange face to face dimensions. Folds safely w/ pocket clip.
Stainless steel 0.1 graduations are accurate within 0.05mm
|
|
|
|
|
1TG700S1-15
|
METRIC TAPER GAGE WITH 130 mm SCALE
|
$24.95
|
|
|
|
|
|
|
PHONE ORDER LINE
586-268-1556 |
|
|
|
|
|
METRIC TAPER GAGE COMBO
1 to 15 mm Metric Taper Gauge for measuring slot and gap widths, hole sizes and flange face to face dimensions. Handy depth gage on scale. Back of taper gauge is printed with diameter correction table. Made of Stainless Steel.
0.1 graduations are accurate within 0.05mm
|
|
|
|
|
1TG700AS
|
METRIC TAPER GAGE WITH 150 mm SCALE
|
$24.95
|
|
|
|
|
|
|
PHONE ORDER LINE
586-268-1556 |
|
|
|
|
|
|
|
METRIC TAPER GAGE - 4 LEAF SET
0.1 to 29 mm Metric Taper Gage Set. This four piece set utilizes a much slower taper to give extremely detailed and accurate measurements. Each leaf is approximately 140mm O.A.L. The gage is made of stainless steel and is marked in graduations of 0.5mm.
|
|
|
|
|
|
1TG267M
|
METRIC TAPER GAGE (4 LEAF SET) 0.1 - 29mm
|
$88.00
|
|
|
|
|
RETRACTABLE METRIC TAPER GAGE
1 to 9 mm Metric Taper Gauge for measuring ID of tubing,slot widths, hole sizes and flange face to face dimensions. Gauge retracts safely into it’s case clip.Stainless steel 0.1 graduations are accurate within 0.05mm
|
|
|
|
|
1TGR7001-9
|
RETRACTABLE TAPER GAGE
|
$13.50
|
|
|
|
|
|
1PTG115
|
PLASTIC METRIC TAPER GAUGE 1 - 15mm
|
$16.00
|
|
|
|
|
|
|
NEW STYLE - EASY TO READ
|
|
|
|
|
|
1PTG115B
|
PLASTIC METRIC TAPER GAUGE (EASY TO READ) 1 - 15mm
|
$16.00
|
|
|
|
|
|
PTG115150
|
PLASTIC METRIC TAPER GAGE WITH 150 mm SCALE
|
$18.95
|
|
|
|
|
|
|
NEW ITEM - PLASTIC TAPER GAUGE - FOR ACCURATE READINGS OF GAPS AND SLOTS WITHOUT SCRATCHING OR DAMAGING PARTS WHILE INSPECTING
|
|
|
 |
|
|
|
|
|
1STG110315
|
COMBO STEP 1-10 mm & TAPER GAGE 3-15mm
|
$16.00
|
|
|
|
|
BENT GO-NO GO METRIC FEELER PLUG GAGES
Plug gages are bent to 135 degrees to allow inspection and checking of fixtures in tight areas. These bent go- no go plug gages are not intended to measure angles. The plug gages are bent to allow access in tight areas. Size range available .22 mm to 6.00 MM. Metric and standard sizes available Fast Turnover Time
|
|
|
|
|
|
CALL FOR QUOTE
586-268-1556
|
|
|
|
|
|
1BTG250350
|
BENT PLUG GAGE 2.5 MM GO & 3.5 MM NO/GO
|
IN STOCK
|
|
1BTG (SIZE)
|
OTHER SIZES AVAILABLE ON REQUEST
|
IN STOCK
|
|
|
|
|
|
|
ROUND TAPERED GAUGES FOR ACCURATE READINGS IN HOLES AND SLOTS
|
|
|
 |
|
|
|
|
|
1TG710A
|
1 ~ 6 mm accuracy +/- .05mm O.A.L. 90mm
|
$60.00
|
|
1TG710B
|
4 ~ 15mm accuracy +/- .05mm O.A.L. 175mm
|
$158.00
|
|
1TG710C
|
4 ~ 25 mm accuracy +/- .05mm O.A.L. 290 mm
********* NOT SHOWN ********
|
$260.00
|
|
|
|
|
Spartan Tool Sales Inc.
Sterling Heights, Michigan 48311 USA
Phone: 586-268-1556 |
|
